d standard construction d3g - glass epoxy construction specifications electrical current and voltage rating: make and break resistive load 1.5 amps @ 28 vdc; 0.5 amp @ 115 vac. current carrying capacity: 9 amps. dielectric strength: 1,000 vac between current carrying parts and ground. contact resistance: average initial 3.5 milliohms. insulation resistance: glass in excess of 750,000 megohms. ceramic in excess of 1,000,000 megohms. diallyl in excess of 900,000 megohms. hardware: mounting nut and lockwasher are shipped assembled. epoxy glass insulation - brass silver plate switches - solder lug terminals - 30 in dex - adjustable stops set @ 2 pos. ceramic insulation - silver alloy - 2.6 amps @ 28 vdc switches - solder lug terminals - 30 ind ex - adjustable stops set @ 2 pos. specifications and ordering information d3 - series 1 5/16" diameter 1.5 amps @ 28 vdc mechanical materials and finishes: all parts utilize non-corrosive materials. clips and rotors: silver alloy standard on ceramic. brass with silver plate standard on glass. insulation: glass epoxy, ceramic, or diallyl phthalate. index: single-ball, hill and valley. index life: 25,000 cycles minimum. index torque: switches have lowest practical torque consistent with crisp detenting and smooth, reliable operation. index angles: positive 30 standard, 60 available. index stops: adjustable standard, fixed or continuous. stop strength: 25 in. lbs. minimum. standard part number dimensions * figures are shown on pages 55 and 56. active poles/ no. of shorting non- fig. poles positions section sections shorting * active poles/ no. of shorting non- fig. poles positions section sections shorting * 22 unit of electro switch corp. electronic products 2010 yonkers road raleigh, nc 27604 t elephone: (888) rotarys or (919) 833-0707 fax: (800) 909-9171 or (919) 833-8016 the d3 series was originally designed as a high quality military switch, but is ideal for use in both military and commercial equipment applications. the standard features of this hill and valley design are glass epoxy insulation and a 30 index, with options of ceramic and diallyl insulation and a 60 index. 01 02-11 1 1 d3g0111s d3g0111n da 01 02-11 1 1 d3c0111s D3C0111N da 02 02-11 1 2 d3g0211s d3g0211n da 02 02-11 1 2 d3c0211s d3c0211n da 02 02-05 2 1 d3g0205s d3g0205n dh 02 02-05 2 1 d3c0205s d3c0205n dh 03 02-11 1 3 d3g0311s d3g0311n da 03 02-11 1 3 d3c0311s d3c0311n da 03 02-03 3 1 d3g0303s d3g0303n dm 03 02-03 3 1 d3c0303s d3c0303n dm 04 02-05 2 2 d3g0405s d3g0405n dh 04 02-05 2 2 d3c0405s d3c0405n dh 06 02-03 3 2 d3g0603s d3g0603n dm 06 02-03 3 2 d3c0603s d3c0603n dm 06 02-05 2 3 d3g0605s d3g0605n dh 06 02-05 2 3 d3c0605s d3c0605n dh
d insulation and printed circuit board terminal options d3c - ceramic construction d3d -diallyl phthalate construction p.c. board mounting pattern additional options and ordering information d3 - series custom switches are available. contact the factory with your complete specifications. unit of electro switch corp. electronic products 2010 yonkers road raleigh, nc 27604 t elephone: (888) rotarys or (919) 833-0707 fax: (800) 909-9171 or (919) 833-8016 23 d3 customers specified order number for standard options (specify) (specify) (specify) (specify) (specify) (specify) (specify) (specify) additional options shaft , bushing , and flat options shaft as vi ewed with non-turn lug at 9 o'clock and shaft in extreme ccw position and strut bolts oriented vertically. y w z u r 2 digit insulation total active contact series type poles positions type terminal index stop shaft/ shaft type angle type bushing flat d3 g - glass 01 - min. 12 - max @ 30 n- non c- ceramic 06 - max @ 60 shorting (silver alloy) s - shorting d- diallyl l- solder lug 30 a- adj. r- rear p.c. 60 f - fixed c- cont. see see chart chart ? ? how to order additional options:
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: electroswitch: ? d3g0603n? d3g0603s? d3c0303n? d3c0211n? d3c0405n? D3C0111N? d3c0205n? d3g0303n
|
